We’re looking for INDIVIDUALS who take pride in their work, who thrive in solving difficult problems, and who want to see their contributions turn into real hardware and real capability.
Joining Auriga means joining a team where your ideas move quickly from sketch, to prototype, to fielded system. It means working with people who hold themselves to the highest standard, because the missions we enable demand nothing less.

We don’t chase the abstract or the theoretical. we build systems that perform, repeatedly, at the limits of what’s been done before.

If yOU want to build technology that transform industries, and advances what’s possible, this is the place to do it.
Open Positions
Power Electronics Engineer (Level II / III)
We are looking for a Power Electronics Engineer (Level II / III) who combines hands-on power converter design and embedded control with working knowledge of battery and charging systems. You will design and simulate power conversion and drive hardware, develop the control firmware that runs it, and test, measure and validate the energy storage and charging systems that power our launchers, both in-house and vendor supplied. You will push these systems to their limits safely, tune their performance and document what you find so the rest of the team can build on it. This role suits someone who is equally comfortable in simulation, at the firmware debugger and on the bench with a scope probe in hand, who can work without close supervision, and who is ready to lead technical efforts as the program grows.
Power Electronics Engineer (Level II / III)
We are looking for a Power Electronics Engineer (Level II / III) who combines hands-on power converter design and embedded control with working knowledge of battery and charging systems. You will design and simulate power conversion and drive hardware, develop the control firmware that runs it, and test, measure and validate the energy storage and charging systems that power our launchers, both in-house and vendor supplied. You will push these systems to their limits safely, tune their performance and document what you find so the rest of the team can build on it. This role suits someone who is equally comfortable in simulation, at the firmware debugger and on the bench with a scope probe in hand, who can work without close supervision, and who is ready to lead technical efforts as the program grows.
KEY RESPONSIBILITIES:
Qualifications:
Mechanical / Structural Design Engineer (Level III / IV)
We are looking for a mid- to senior-level mechanical / structural engineer to design mechanisms and load-bearing structures for defense and aerospace hardware. You will take concepts and early prototypes through production-ready designs, applying design for manufacturability and assembly (DFM/DFA), rigorous GD&T, and the analysis needed to prove the design works. You will own designs from requirements through qualification, lead and participate in formal design reviews, and work closely with systems, electrical, manufacturing, quality and supplier teams.
Mechanical / Structural Design Engineer (Level III / IV)
We are looking for a mid- to senior-level mechanical / structural engineer to design mechanisms and load-bearing structures for defense and aerospace hardware. You will take concepts and early prototypes through production-ready designs, applying design for manufacturability and assembly (DFM/DFA), rigorous GD&T, and the analysis needed to prove the design works. You will own designs from requirements through qualification, lead and participate in formal design reviews, and work closely with systems, electrical, manufacturing, quality and supplier teams.
KEY RESPONSIBILITIES:
Qualifications:
Electromechanical Technician Lead / Manager
Auriga Space is seeking an experienced Electromechanical Technician Lead / Manager to lead a multidisciplinary team responsible for building, integrating, and validating advanced aerospace hardware. This is a hands-on leadership role for someone who enjoys working alongside their team, solving technical challenges, and establishing the processes needed to deliver high-quality hardware. You will oversee precision mechanical assembly, electrical wiring and harness fabrication, integration, and testing while maintaining high standards for safety, quality, and workmanship. The ideal candidate brings a strong background in both mechanical and electrical assembly, proven technician leadership experience, and the ability to thrive in a fast-paced startup environment. You'll work closely with engineering, manufacturing, quality, and program leadership to translate designs into reliable hardware while helping build a team and processes that can scale.
Electromechanical Technician Lead / Manager
Auriga Space is seeking an experienced Electromechanical Technician Lead / Manager to lead a multidisciplinary team responsible for building, integrating, and validating advanced aerospace hardware. This is a hands-on leadership role for someone who enjoys working alongside their team, solving technical challenges, and establishing the processes needed to deliver high-quality hardware. You will oversee precision mechanical assembly, electrical wiring and harness fabrication, integration, and testing while maintaining high standards for safety, quality, and workmanship. The ideal candidate brings a strong background in both mechanical and electrical assembly, proven technician leadership experience, and the ability to thrive in a fast-paced startup environment. You'll work closely with engineering, manufacturing, quality, and program leadership to translate designs into reliable hardware while helping build a team and processes that can scale.
KEY RESPONSIBILITIES:
Qualifications:
Electrical Technician
Auriga is seeking an experienced Electrical Technician to build, wire, debug, and test the electrical systems behind our electromagnetic launch hardware. This is a hands-on role centered on harness fabrication, electrical integration, and troubleshooting across both low-voltage control and signal systems and high-voltage power systems. You will work from schematics, wiring diagrams, and engineering drawings, but also from verbal direction and early-stage documentation, partnering closely with engineers to turn designs into working hardware and to flag issues before they reach the build. The ideal candidate has 5+ years of hands-on electrical experience, takes pride in clean, precise, well-documented work, holds a safety-first mindset around high voltage, and thrives in a fast-paced start-up environment.
Electrical Technician
Auriga is seeking an experienced Electrical Technician to build, wire, debug, and test the electrical systems behind our electromagnetic launch hardware. This is a hands-on role centered on harness fabrication, electrical integration, and troubleshooting across both low-voltage control and signal systems and high-voltage power systems. You will work from schematics, wiring diagrams, and engineering drawings, but also from verbal direction and early-stage documentation, partnering closely with engineers to turn designs into working hardware and to flag issues before they reach the build. The ideal candidate has 5+ years of hands-on electrical experience, takes pride in clean, precise, well-documented work, holds a safety-first mindset around high voltage, and thrives in a fast-paced start-up environment.
KEY RESPONSIBILITIES:
Qualifications:
Business Development Specialist / Manager – Aerospace & Defense
Auriga is seeking a Business Development Associate to support and accelerate our defense and commercial pursuits. This is an intermediate-level role for someone who has a few years of government or aerospace business development behind them and is ready for more ownership without needing to run capture alone. You will be the engine behind our proposals, represent Auriga in meetings with government customers, primes, and partners, and keep the pipeline organized and moving. You will work closely with our business development leadership and with engineering, and you will get real exposure to senior stakeholders from day one. This is a place to grow into a capture and closing role rather than a place to sit still. This role is based onsite at our Garden Grove, CA facility.
Business Development Specialist / Manager – Aerospace & Defense
Auriga is seeking a Business Development Associate to support and accelerate our defense and commercial pursuits. This is an intermediate-level role for someone who has a few years of government or aerospace business development behind them and is ready for more ownership without needing to run capture alone. You will be the engine behind our proposals, represent Auriga in meetings with government customers, primes, and partners, and keep the pipeline organized and moving. You will work closely with our business development leadership and with engineering, and you will get real exposure to senior stakeholders from day one. This is a place to grow into a capture and closing role rather than a place to sit still. This role is based onsite at our Garden Grove, CA facility.
KEY RESPONSIBILITIES:
Qualifications:
CNC Programmer and Machinist
Auriga is seeking an experienced CNC Programmer and Machinist to program, set up, and run the precision hardware behind our electromagnetic launch systems. This is a hands-on, dual role. You will take parts from a 3D model through CAM programming, work holding and setup, first article, and production, and you will be at the machine running them. Our work is prototype-heavy and changes quickly, so you will see a wide variety of parts and materials in small quantities rather than long production runs. You will work directly with design and manufacturing engineering to improve producibility before a part ever hits the floor. The ideal candidate is a strong machinist who programs well, takes ownership of the shop, and thrives in a fast-paced start-up environment. This role is based onsite at our Garden Grove, CA facility.
CNC Programmer and Machinist
Auriga is seeking an experienced CNC Programmer and Machinist to program, set up, and run the precision hardware behind our electromagnetic launch systems. This is a hands-on, dual role. You will take parts from a 3D model through CAM programming, work holding and setup, first article, and production, and you will be at the machine running them. Our work is prototype-heavy and changes quickly, so you will see a wide variety of parts and materials in small quantities rather than long production runs. You will work directly with design and manufacturing engineering to improve producibility before a part ever hits the floor. The ideal candidate is a strong machinist who programs well, takes ownership of the shop, and thrives in a fast-paced start-up environment. This role is based onsite at our Garden Grove, CA facility.
KEY RESPONSIBILITIES:
Qualifications:








